"How to build a wakeboard slider"

Learning How to Build a Wakeboard Slider

A wakeboard slider is a device in which the wake boarder will jump on, while being towed behind a boat, and then land back into the water. Basically a slider is like a piece to an obstacle course. You can buy sliders, but then of course you also have the option of learning how to build a wakeboard slider yourself, which is ideal because then you can customize it and make it as easy or difficult to jump as you want.

Getting Started

When it comes to learning how to build a wakeboard slider, the first thing you need to do is get the necessary materials together. These materials include: plastic drums, plywood, screws, PVC cleaner, cement, PVC, PVC internal unions, and toggle bolts.

Once you have all of the materials for your wakeboard slider gathered together you need to first build yourself a basic frame holding the drums, one which has a length and breadth of at least twelve and six feet respectively. Now you need to box the drums from all four corners, so that the barrel will not be able to fit through all the way, and then add supports for the four feet long beam. After this you need to attach angle braces to it so that dangerous right-left movements will be prevented, and also to support the plywood.

Now you just need to mount it to the PVC, join the two lengths, and attach the PVC, using standard toggle bolts. Remember that it is going to be most ideal if you use the bolts at a distance of about four feet, so that the nuts are facing the direction in which the tubing is running lengthwise. Once you have completed this you want to add the rear slider, and then evenly put the front section of the slider to the rear, making sure that there are no gaps visible.

Now you want to add the arc to the front end of the wakeboard slider so that the tubing goes underwater, and now you must apply the braces throughout the arc for support. Then you are finished making your wakeboard slider and you can get out on the water and test it out for yourself. Remember that when learning how to build a wakeboard slider if you find it too low or too high you can always resume working on it and adjust the levels to your own specific preferences.

Not only does this make it more convenient for you but also by learning how to build your own wakeboard slider you will save yourself a great deal of money and have bragging rights.

How to build a wakeboard slider

Good Advice On How To Build A Wakeboard Slider

Ok so you want to know how to build a wakeboard slider, eh? The first thing you do is make sure that your fingers cut across the seams of the ball and that you keep your fingers together through the whole pitch. As you release the ball you turn your wrist and that gives it the slide motion. Oh, wait a minute. That was how to throw a backdoor slider and not how to build a wakeboard slider. Sorry about that, I have to learn to slow down when I read things. When learning how to build a wakeboard slider you may want to keep in mind that someone will be grinding down the slider at very fast speeds so location is everything. Lining up the slider to end up into a bunch of large rocks may be funny, but it is also really cruel.

There are no hard and fast rules on how to build a wakeboard slider other than it needs to be secured wherever it is and, as mentioned before rocks are a hazard. Before we go any further on how to build a wakeboard slider maybe we should throw out some information on what exactly a wakeboard slider is. If you are familiar with the term “grinding a rail” in the skateboard world then you know what a wakeboard slider is. A wakeboard slider is a long tube set up so that the wakeboard rider can slide along it while doing their series of stunts. It is grinding a rail for a wakeboard.

Make It Slick

The first step on how to build a wakeboard slider is to always remember that the actual sliding surface needs to be slick and possibly even get slicker when water is added to it. That is why thick PVC plastic pipe is the best thing to use when you are learning how to build a wakeboard slider. PVC plastic pipe is slick and can be waxed to be even slicker and it can offer even less resistance when wet. The last thing you want is to hit your slider with your wakeboard and then get launched into the air because there is too much grab to your surface. That is a bummer, but even more importantly that can result in serious injury so avoid it when you are building your slider.

It is probably also a really bad idea to have your slider just floating out on the water. Always secure your slider in some way and always make sure it has support underneath it so that it does not disappear under the water when the wakeboard hits it. Sometimes people like to put their slider near the beach so that the wakeboard rider hits the slider and then safely ends their run by landing on the soft beach sand. This is a great idea just remember the whole thing about the rocks that we talked about earlier.